Giái pháp thay thế cho DS1307
The MCP79410 general purpose I2C™Compatible real-time clock/calendar (RTCC) is highly integrated with nonvolatile memory and advanced features normally found in higher priced devices. These features include a battery switchover circuit for backup power, a timestamp to log power failures and digital trimming for accuracy. Using a low-cost 32.768 kHz crystal or other clock source, time is tracked in either a 12-hour or 24-hour format with an AM/PM indicator and timing to the second, minute, hour, day of the week, day, month and year. As an interrupt or wakeup signal, a multifunction open drain output can be programmed as an Alarm Out or as a Clock Out that supports 4 selectable frequencies. In addition, non-volatile memory is included along with a Unique ID in a locked section of EEPROM that can be unlocked and programmed by the End User.
General purpose RTCC with features that target low power and smart energy applications.
* Low Power Operation
- VCC Min = 1.8V
- Icc < 5 μA Typical Dynamic Current
* Low Backup Power
- VBAT Min = 1.3V
- Ibat < 700nA ' Typical Timekeeping & SRAM Retention Current
* Automatic Battery Switchover with Timestamp
- VCC to VBAT ' (Power lost)
- VBAT to VCC ' (Power restored)
* Dual alarms with single IRQ Output that operates on VCC or VBAT
* Clock Out frequencies of 32.768, 8.192 & 4.096 KHz and 1 Hz
* Digital Trimming Range from -127 to +127ppm in 1ppm steps
- 1 ppm is approximately 86 milliseconds/day
* EEPROM has 8 Bytes/Page with Block Sector write protection
- Protect none, 1/4, 1/2 or all of array
* Factory standard or custom ID programming available
|
Parameter Name
|
Value
|
|
Max Communications Speed
|
400 KHz
|
|
Pin Count
|
8
|
|
Minimum Clock Count (seconds)
|
1 sec
|
|
Battery-backed SRAM (Bytes)
|
64
|
|
EEPROM (Kbits)
|
1
|
|
Unique ID (bits)
|
64
|
|
Unique ID Programming
|
Blank ID
|
|
Temperature Range (C)
|
-40 to +85
|