Parameter Name	Value
MAC	Yes
PHY	Yes
TX/RX RAM Buffer(bytes)	8192
Interrupt Pin	1
LEDs	2
Op. Voltage (V)	3.3
Temp. Range Min. (°C)	-40
Temp. Range Max. (°C)	85
Max. Speed (MHz)	25
Interface	SPI
Pre-Programmed MAC Address	No
Security Engines	No
Standalone Ethernet Controller	10Base-T

 

Parameter Name	Value
MAC	Yes
PHY	Yes
TX/RX RAM Buffer(bytes)	8192
Interrupt Pin	1
LEDs	2
Op. Voltage (V)	3.3
Temp. Range Min. (°C)	-40
Temp. Range Max. (°C)	85
Max. Speed (MHz)	25
Interface	SPI
Pre-Programmed MAC Address	No
Security Engines	No
Standalone Ethernet Controller	10Base-T

General: - IEEE 802.3 compatible Ethernet Controller - Integrated MAC and 10BASE-T PHY - 8 Kbyte Transmit/Receive Packet Dual Port Buffer  SRAM - Programmable Automatic Retransmit on Collision - Programmable Padding and CRC Generation - Programmable Automatic Rejection of Erroneous Packets Buffer: - Configurable transmit/receive buffer size - Hardware managed circular receive FIFO - Byte-wide random and sequential access - Internal DMA for fast memory copying - Hardware assisted IP checksum calculation PHY: - Wave shaping output filter - Loopback mode MAC: - Support for Unicast, Multicast and Broadcast packets - Programmable pattern matching of up to 64 bytes within     packet at user defined offset - Programmable wake-up on multiple packet formats,    including Magic Packet®, Unicast, Multicast, Broadcast,    specific packet match or any packet Packaging: - SOIC - SPDIP - SSOP - QFN (6x6 mm)

ENC28J60 Stand-Alone Ethernet Controller with SPI Interface