Parameter Name	Value
Program Memory Type	Flash
Program Memory (KB)	48
CPU Speed (MIPS)	10
RAM Bytes	3,968
Data EEPROM (bytes)	1024
Digital Communication Peripherals	1-A/E/USART, 1-MSSP(SPI/I2C)
Capture/Compare/PWM Peripherals	1 CCP, 1 ECCP
Timers	1 x 8-bit, 3 x 16-bit
ADC	13 ch, 10-bit
Comparators	2
Temperature Range (C)	-40 to 125
Operating Voltage Range (V)	2 to 5.5
Pin Count	40

Features

CPU

   Up to 10 MIPS performance

   C compiler optimized RISC architecture

   8 x 8 Single Cycle Hardware Multiply

 

System

   Internal oscillator support - 31 kHz to 8 MHz, up to 32 MHz with 4X PLL

   Fail-safe Clock Monitor – allows safe shutdown if clock fails

   Watchdog Timer with separate RC oscillator

   Wide operating Voltage range; 2.0V to 5.5V

 

nanoWatt Power Managed Modes

   Run, Idle and Sleep modes

   Idle mode currents down to 5.8uA typical

   Sleep mode currents down to 0.1uA typical

 

Analog Features

   10-bit ADC, 13 channels, 100K samples per second

   Programmable Low Voltage Detection Module

   Programmable Brown-out Reset module

   Two Analog comparators with input multiplexing

 

Peripherals

   Master Synchronous Serial Port supports SPI ™ and I2C™ Master and Slave Mode

   EUSART module including LIN bus support

   Four Timer Modules

   Up to 5 PWM outputs

   Up to 2 Capture / Compare

PIC18F2525/2620/4525/4620 Data Sheet