MCU, 16BIT, 192K FLASH, 16MIPS, 80TQFP; Controller Family/Series:PIC24; Core Size:16bit; No. of I/O's:65; Program Memory Size:192KB; RAM Memory Size:16384Byte; CPU Speed:32MHz; Oscillator Type:External, Internal; No. of Timers:5; Peripherals:ADC, Comparator, PWM, RTC, Timer; No. of PWM Channels:9; Digital IC Case Style:TQFP; Supply Voltage Range:2V to 3.6V; Operating Temperature Range:-40°C to +85°C; No. of Pins:80; SVHC:No SVHC (15-Dec-2010); Operating Temperature Max:85°C; Operating Temperature Min:-40°C; Clock Frequency:32MHz; Flash Memory Size:192KB; Interface:I2C, JTAG, SPI, USB; Interfac...

Features

  CPU

     - Up to 16 MIPS performance

     - 16 x 16 Hardware Multiply, Single Cycle Execution

     - 12-bit x 16-bit Hardware Divider

     - C Compiler Optimized Instruction Set

  nanoWatt Power Managed Modes

     - Run, Idle and Sleep modes

     - Multiple, Switchable Clock Modes for Optimum Performance and Power Management

     - Run mode: 1 mA/MIPS, 2.0V Typical

     - Sleep mode Current Down to 100 nA Typical

     - Standby Current with 32 kHz Oscillator:2.5 uA,2.0V typical

  Flash Program Memory

     - Self-Reprogrammable under Software Control

     - 10,000 erase/write cycles

     - 20 year data retention

     - EEprom emulation capable

  System

     - Internal oscillator support - 31 kHz to 8 MHz, up to 32 MHz with 4X PLL

     - On-chip LDO Voltage Regulator

     - JTAG Boundary Scan and Flash Memory Program Support

     - Fail-Safe Clock Monitor – allows safe shutdown if clock fails

     - Watchdog Timer with separate RC oscillator

  Analog Features

     - 10-bit ADC, 16 channels, 500k samples per second

     - Three Analog comparators

  Universal Serial Bus Features

     - USB v2.0 On-the-Go compliant

     - dual role capable, can act as either Host or Device

     - Low speed(1.5Mb/s) and full speed(12 Mb/s) operation in host mode

     - Full speed USB operaton in Device mode

     - Supports 32 endpoints

     - On-chip USB transceiver

  Peripherals

     - CTMU supports Capacitive Touch applications

     - Perpheral Pin Select allows I/O remapping of many peripherals in real time

     - 4xUART Modules with LIN and IrDA support, 4 Deep FIFO

     - 3xSPI ™ Modules with 8 Deep FIFO

     - 3xI2C™ Modules with Master and Slave Modes

     - Five 16-bit Timer Modules

     - Up to 9 Input Capture and 5 Output Compare/PWM with dedicated time base

     - Hardware RTCC, Real-Time Clock Calendar with Alarms

     - PMP, Parallel Master Port, with 16 Address Lines, and 8/16-bit Data

Microchip PIC24FJ192GB108-I/PT datasheet: