Debug Support
• Integrated debug support on Device. No debug header is required
• Optional external debug headers, AC244043 (F) / AC244044 (LF), are also available
• Debug and programming support is available via PICkit™ 3, and MPLAB® ICD 3
• For Debug Header information, please refer to DS51292

Parameter Name	Value
Program Memory Type	Flash
Program Memory (KB)	7
CPU Speed (MIPS)	8
RAM Bytes	256
Data EEPROM (bytes)	256
Digital Communication Peripherals	1-A/E/USART, 1-MSSP(SPI/I2C)
Capture/Compare/PWM Peripherals	2 CCP, 2 ECCP
Timers	4 x 8-bit, 1 x 16-bit
ADC	12 ch, 10-bit
Comparators	2
Temperature Range (C)	-40 to 125
Operating Voltage Range (V)	1.8 to 5.5
Pin Count	20
XLP	Yes
Cap Touch Channels	12

Features

 Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels

 Flash Program Memory with self read/write capability

 Internal 32MHz oscillator

 Integrated Capacitive mTouch Sensing Module

 Data Signal Modulator for generation of custom bit streams

 CVREF can be used as 5-bit DAC

 MI2C, SPI, EUSART w/auto baud

 2 ECCP & 2 CCP (Enhanced/Capture Compare PWM)

 Comparators with selectable Voltage Reference

 12 Channel 10b ADC with Voltage Reference

 25mA Source/Sink current I/O

 Four 8-bit Timers (TMR0/TMR2/TMR4/TMR6)

 One 16-bit Timer (TMR1)

 Extended Watchdog Timer (EWDT)

 Enhanced Power-On/Off-Reset

 Brown-Out Reset (BOR)

 In Circuit Serial Programming (ICSP)

 On Board In-Circuit Debug

 Wide Operating Voltage (1.8V – 5.5V)

 Low Power PIC16LF182x variants (1.8V – 3.6V)

 Standby Current (PIC16LF182X): 30 nA @ 1.8V, typical

PIC16(L)F1824/1828 14/20-Pin Flash MCU with nanoWatt XLP Technology