Debug Support
• Integrated debug support on Device. No debug header is required
• Optional external debug headers, AC244043 (F) / AC244044 (LF), are also available
• Debug and programming support is available via PICkit™ 3, and MPLAB® ICD 3
• For Debug Header information, please refer to DS51292

 

Parameter Name	Value
Program Memory Type	Flash
Program Memory (KB)	7
CPU Speed (MIPS)	8
RAM Bytes	256
Data EEPROM (bytes)	256
Digital Communication Peripherals	1-A/E/USART, 1-MSSP(SPI/I2C)
Capture/Compare/PWM Peripherals	1 ECCP
Timers	2 x 8-bit, 1 x 16-bit
ADC	4 ch, 10-bit
Comparators	1
Temperature Range (C)	-40 to 125
Operating Voltage Range (V)	1.8 to 5.5
Pin Count	8
XLP	Yes
Cap Touch Channels	4

Features

 Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels

 Flash Program Memory with self read/write capability

 Internal 32MHz oscillator

 Integrated Capacitive mTouch Sensing Module

 Data Signal Modulator Module

 MI2C, SPI, EUSART w/auto baud

 ECCP (Enhanced/Capture Compare PWM) Module

 Comparator with selectable Voltage Reference

 4 Channel 10b ADC with Voltage Reference

 25mA Source/Sink current I/O

 Two 8-

bit Timers (TMR0/TMR2)

 One 16-bit Timer (TMR1)

 Extended Watchdog Timer (EWDT)

 Enhanced Power-On/Off-Reset

 Brown-Out Reset (BOR)

 In Circuit Serial Programming (ICSP)

 On Board In-Circuit Debug

 Wide Operating Voltage (1.8V – 5.5V)

 Low Power PIC12LF182x variants (1.8V – 3.6V)

 Standby Current (PIC12LF1840): 20 nA @ 1.8V, typical

 Active Current (PIC12LF1840): 50uA/MHz @ 1.8V, typical
 

PIC12(L)F1840 8-Pin Flash MCU with nanoWatt XLP Technology Data Sheet