The PIC32 Ethernet Starter Kit provides the easiest and lowest cost method to experience 10/100 Ethernet development with PIC32. Combined with Microchip's free TCP/IP software, your project will be running in no time. The PIC32 has an available CAN 2.0b peripheral and USB host/device/OTG.
The Ethernet Starter Kit has a form factor and expansion connector that are compatible with other PIC32 Starter Kits.
|
|
- Free MPLAB IDE v8.43 or newer
- Free MPLAB C Compiler for PIC32 with no code size limit
- Example project files for Ethernet and USB applications
|
|
|
|
|
- Integrated programmer - all you need is the included USB Cable
- Program and verify a full 512k image in less than 9 seconds
|
|
|
|
|
- Integrated debugger - all you need is the included USB cable
- Full C source-based debugging in MPLAB IDE
|
|
|
|
|
- PIC32 running at 80 MHz with 512K Flash, 128K RAM, 8 ch. DMA + 8 ch. DMA dedicated to Ethernet, CAN and USB
- USB powered board
- USB and Ethernet connectors, user switches, and LEDs
|
|
|
|
|
- Expansion connector enables addition of Microchip's PIC32 expansion boards or create your own
- Majority of MCU signals are present on the connector [Hirose: FX10A-120P/12-SV1(71)]
|
Box Contents:
PIC32 Ethernet Starter Board
Standard A to mini B cable for debugger
Standard A to micro B cable for USB application development
Ethernet cable
The PIC32 Ethernet Starter Kit runs on Microsoft Windows 2000, Windows XP, Windows Vista, and Windows 7.
Datasheet and Source 
